Single-shaft
shredder - DW Range
The single shaft shredders are used for
volume reduction at landfill sites, pre-shredding after
homogenization at mechanical/biological waste treatment
plants, in recycling plants, in old wood preparation and
for homogenization of feedstock in thermal treatment
plants. All materials in the areas listed above can be
shredded, such as municipal, industrial and commercial
waste, railroad sleepers, trunk and root timber, and
mixed construction waste.
The company's significant experience in the construction
of slow speed shredders can be seen in the high
performance, effectiveness, stability and quality of the
Doppstadt roller shredders.
Among other
features, the DW range offers:
- Powerful and safe
shredding for heavy materials.
- A single-shaft
principle with a shredding comb which is
automatically retracted when it comes into contact
with tramp material, avoiding damage to the machine.
- Replaceable,
material-specific shaft and comb teeth.
- Easy maintenance due
to large access doors on all sides and central
lubrication points.
- Short set-up times
due to a high degree of mobility and simple machine
operation.
The right solution for every task
The
advantages of the mobile machines lie in their flexibility. Material
on-site is processed and prepared quickly and cost-efficiently. This
creates new, valuable products for reuse. The individual machines can
be combined into a processing line to form a mobile system capable of
undertaking various steps of material preparation.
The solution of the
most difficult shredding problems …
....is
easy for the DW 2560 Buffalo with the
hydraulically controlled shredding comb. It
accomplishes its tasks by a single-shaft
principle. Thanks to various, quickly
replaceable tools, the DW 2560 can be adjusted
to the different shredding tasks. The efficient
mechanic power transmission is carried out by a
direct drive by planetary gear. The noise level
and the fuel consumption of the motor are very
low. The motor is a EUROMOT 2 with high torque
and thus extremely economic. |
 Description:
Slowly operating shredder as
center-axle attachment for shredding of old and
demolished wood, medium-sized trunk and root timber,
green pruning's, biological waste, municipal and bulky
rubbish recycling operations, waste dumps, preliminary
system step.
- The cooler
is easily accessible. For self-cleaning, the
large fan wheel is reversible. The low speed
keeps down the noise level.
- Powerful
direct drive with electric reversing
facility. The motor is easily accessible
from 2 sides.
- The roller
teeth tear the material through the
hydraulically controlled shredding comb, the
comb opens automatically in case of large
foreign bodies in order to protect the
machine and to reduce the tool wear.
- The comb
elements are secured by wedges, easily
accessible from outside and thus quickly
replaceable.
- Easy
operation, exact adjustment and reading of
the machine data by multifunction display.
The machine can be moved by wheel loader and
slip-on coupling. Machine operation by
remote control*.
- The machine
is ready to work within a few minutes thanks
to the hydraulically foldable rear conveyor.
- Central-axis
trailer chassis.
- Tires 385/65
R 22.5.
- 3"
CE-trailer coupling ring.
-
DaimlerChrysler diesel motor OM 501 LA,
313hp.
- Fluid
coupling power transfer.
- Hydraulic
cooling system.
- Reversing
fan.
- Roller
length 8', diameter 24" (not including
tips).
- Rear
conveyor length 26', width 4'.
- Heavy-duty
comb placed into position by hydraulic rams
with nitrogen-filled accumulators allowing
comb to break away and reposition during
operation, preventing un-crushable damage.
- Equipped
with wood-waste teeth for roller and comb.
- Easily
replaceable teeth on shaft and comb.
- Paint:
2-component paint RAL 2011, deep orange.
Optional
equipment:
- Special
paint in RAL colors, instead of RAL 2011
– basic thickness 50 µm, cover thickness
40 µm
- Additional
hydraulic connection 11 cm3 at rear
– e.g. for driving an additional
conveyor.
- Winter
equipment for OM 501 LA.
- Complete
remote control w/ following functions:
– includes sender/receiver, holder for
sender
– loading cable 12/24V, 230V
– 2 batteries
– motor stop, motor speed +/-
– comb open/closed
– roller stop/reverse
– magnetic coupling on/off
– lower belt reverse
– machine move and steer
– rear and lower conveyor on/off
– driving speed fast/slow
- Complete
trapezoidal tooth inserts, 2.4" wide
– 17 pcs. per roller, 18 pcs. per comb.
- Comb
extension, 3 - layers
– 16 steel bows and steel wedges (when
dismounting: wide wedges necessary).
- Overband
magnet for rear conveyor
– with separate support
– requires antimagnetic central part of
rear conveyor and additional hydraulic
connection.
– transported separately.
- Magnetic
pulley for rear belt.
– upper return drive pulley as permanent
magnet, w/ chute.
- Damping
facility for external water supply.
- 16" hopper
heightening plates, screwable, on 3 sides.
|
The DW series of
shredders also includes semi trailers,
stationary machines and tracked vehicles. Diesel
and electric drives of most different classes of
performance are available. |
 |
| |
|
 |
Shredding of bulky
waste, domestic waste, garbage, green waste,
industrial waste, mixed construction waste,
organic waste, roots and waste wood. |
|
Please feel free to contact
us if you have any
questions
regarding
our
Recycling
and
Material
Reduction
Equipment.
We'll be more than happy
to help you with all
your needs.
Are
you
looking
for
a
Jaw
Crusher,
Impact
Crusher,
Cone
Crusher
or
a
Screen?
We
have
the
equipment
for
you!
For a online
Material
Processing
Manual &
Charts
click
here . |
|
|
|
