| |
|
Transport Dimensions:
Width: 9'10"
Length: 58"
Height: 11'2"
Weight: 34.6 Tons
Operational Dimensions:
Width: 53'2"
Length: 59'10"
Height: 20'4"
Weight: 34.6 Tons
|
Tipping Grid: The target area 3890mm x 1900mm opens with the aid of hinged wing plates to 4369mm.
A crusher inlet chute is fitted as standard to work in tandem with primary or secondary crushers. The grid is hydraulic tipping, with a radio controlled timer system. Each bar is free floating for ease of aperture change.
Loading Width-target area: 14'4"
Loading height: 12'7"
Tipping method: Radio Remote
Weight:
Available Apertures: 4" & 6"
Operating angles: 15 degrees - 30 degrees
No of tipping cylinders: 2
Type of grid assembly: Free Floating
Grid area inc Wingplates: 14'4" x 6'3"
Grid Option: 12'
Grid Options: 14' |
| |
|
| Feed Hopper: The hopper is bolt in and has a
nominal volume of
8m3 (10.4 yd3).
The hopper is fitted with a material
by pass chute for direct feed from a
crusher. This
area of the hopper is
fitted with Hardox wear plates for
protection to the hopper. Under the
material by pass
chute is a dead box
system with Hardox wear plates.
This
prevents damage to the belt of the
belt feeder
system when in direct
feed crusher mode.
Hopper volume/capacity: 10.4 Yd3
Material thickness: 1/4"
Wear plates option: yes
Hopper loading width (No grid): 5'5"
Hopper loading height (No grid): 13'7"
Crusher By-pass chute option: Yes
Crusher feed tray option: Yes |
Belt Feeder: The 3-ply heavy-duty conveyor belt is driven by a gearbox (23:1 ratio) and a 125cc hydraulic motor and has variable speed.
Width: 48"
Length: 13'1"
Speed variable: 0>65 Ft/Min
Motor manufacturer/type: Eaton 125cc
Gearbox manufacturer/model: Bonfiglioli 23:1
Belt type/spec: EP500/3ply 5+1.5 Covers
Tail drum diameter:
ø323 mm
Head drum diameter:
ø340 mm
Scraper type: Rosta
Bearing manufacturer: FYH Triple Seal
|
| |
|
| Main Conveyor (Main Belt To Screen): The 3-ply conveyor belt has a
hydraulic position
adjustment
for maximum screening efficiency.
This conveyor is driven by a
800cc hydraulic motor.
Width: 42"
Belt Length: 37'10"
Bearing manufacturer: FYH Triple Seal
Belt type: EP500/3ply 5+1.5 Covers
Speed: 311 Ft/Min
Tail drum diameter:
ø273 mm
Head drum diameter:
ø290 mm
Lagged head drum: Yes
Plough scraper fitted: Yes
Scraper type: Rosta
Motor / model: Eaton 800cc
|
Screen Box: The screenbox of 5450mm x 1500mm (18’x5’) on both decks is a high amplitude screen. The complete box is bolted together to eliminate any unnecessary heat stress due to welding. The screen has an extra 5º in built screening angle in the bottom deck, and quick release wedge tensioning system on the high impact zone of the top deck. The screenbox angle can be hydraulically adjusted from 24o to 30o. The Screenbox is surrounded by a complete access walkway for maintenance and mesh changes, which easily fold away with our unique elbow style folding mechanism.
Screen length x width: 18'x 5'
Screening surface area: 84 Ft2
Speed: 990 rpm
No of decks: 2
No of meshes/panels: Top-3 Bottom-2
No of bearings: 2
Bearing manufacturer/type: FAG
Sealing strips fitted: Yes
Tension method TD: Side
Tension method BD: End
Adjustable spreader plate fitted: Yes
Screen amplitude: 6mm-8mm
Motor / model: Ronzio 64cc
Screen working angles: 24 degrees - 30 degrees
|
| |
|
| Side Product Conveyors: The 2-ply C15 chevron conveyor beltsare
independent variably controlled and
driven by 315cc hydraulic motors.
Width: 32"
Belt length: 29'6"
Bearing manufacturer: FYH Triple Seal
Belt type: EP250/2ply C15 Chevron
Speed-midsize product: 0>426 Ft/Min
Speed-oversize variable: 0>426 Ft/Min
Tail drum diameter:
ø273 mm
Head drum diameter:
ø290 mm
Motor / model: Eaton 315cc
Discharge heights: 14'10"
Max stockpile capacity: 124Yd3
|
Product Conveyors (Fines): The 3-ply conveyor belt is driven by a 400cc hydraulic motor. The discharge height and conveyor angle can be hydraulically adjusted.
All the conveyors have replaceable skirting and feed boot rubber. They are all fitted with internal v-scrapers to protect the tail drums. The feeder, main and fines conveyor are fitted with Rosta tensioned belt scrapers and the side conveyors are kept clean with octagon beater rollers.
Width: 48"
Belt length: 24'5"
Bearing Manufacturer: FYH Triple Seal
Belt type & Spec: EP400/3ply 3+1.5 Covers
Speed: 574 Ft/Min
Tail drum diameter:
ø273 mm
Head drum diameter:
ø290 mm
Scraper type: Rosta
Motor manufacturer/model: Eaton 400cc
Discharge height at.....: 16'7"
Max stockpile capacity: 170Yd3 |
| |
|
| Engine / Transmission / Powerpack: The power unit is a Caterpillar 3054C,
turbo charged
4-cylinder diesel engine
developing 99Hp at 2200 Rpm.
The engine
meets EU emissions regulation 97/68/EC.
The fuel tank volume is 330 litres and
fuel consumption is
12 to 18 l/hr
depending on material and load.
Engine: Caterpillar 3054C
Fuel consumption: 3-4 Gal/Hour
Engine power output: 99 Hp
Engine classification: Tier II
Manufacturer, Main pump: David Brown
Manufacturer, hydraulic valves: Walvoil
Fuel tank volume: 105 Gal
Hydraulic tank volume: 166 Gal
|
Track Frame:The crawler tracks are 3800mm long, with 500mm wide shoes. The normal ground pressure is 97 Kpa with a travelling speed of 0.8 km/h.
Track shoe width: 20"
Track length C>C: 12'6"
Ground pressure: 14 PSI
Ground clearance: 10"
Gradeability: 28 degrees
Tracking speed - Normal: 0.3 M/h
Tracking speed - High: 0.74 M/h
Radio control option: Yes
|
| |
|
Options:
Shredder c/w Hardox blades: No
Double deck vibrating grid: Yes
Tipping grid apertures - 100mm: Yes
Tipping grid apertures - 150mm: Yes
Dust encapsulation covers: Yes
Folding side walkways: Yes
Water dust suppression (no pumps): Yes
Screen top deck diverter chute: Yes
Screen discharge chute liners: Yes
Adjustable hopper discharge gate: No
Off plant stacker conveyor connection: No
Mast working lights: Yes
Radio controlled tracks
Live double deck vibrating grid
|
Control System:
Remote radio option: Yes
Cable remote: Yes
Emergency stops: Yes
|
| |
