KEY FEATURES:
- 5' WIDE X 16' LONG HORIZONTAL VIBRATING SCREEN.
- 32" HIGH X 43" WIDE 4043 HARD ROCK IMPACT CRUSHER.
- EXCLUSIVE IROCK "MAX FLOW" CHASSIS.
DETAILED FEATURES
HORIZONTAL SCREEN:
5' X 16' triple deck horizontal screen. Triple shaft, with adjustable
timing. Top deck discharges directly into the crusher. The second deck
discharges into the crusher or through a flop gate to a discharge chute
as a product. Third deck has a 24" side discharge conveyor with rubber
lagged head pulley, winged tail pulley, screw type take up, TEFC
electric motor with V-belt drive to a shaft mounted gearbox and drive
guard. Fines discharge out the rear as a product on a 48" fines
conveyor with rubber lagged head pulley, winged tail pulley, screw type
take up, TEFC electric motor with V-belt drive to a shaft mounted
gearbox and drive guard.
HEAVY DUTY HORIZONTAL SHAFT IMPACT CRUSHER:
Feed opening: 32" high x 43" wide.
Rotor diameter: 42".
Operating weight: 24,500 pounds.
Horsepower required: up to 200.
Rotor: square design for increased blow bar exposure, normally
run with two blow bars and two balance bars, stress relieved with
machined mating surfaces.
Blow bars: heavy duty one piece external wedge alloy wedge lock.
Locking system: machined dual taper vertical wedge lock.
Rotor shaft: precision machined one piece tapered shaft with rotor locking rings.
Primary apron: adjustable fabricated reinforced primary cup design with liners for initial reduction.
Secondary apron: adjustable fabricated reinforced secondary cup design with liners for final reduction.
Tertiary apron: fixed fabricated impact zone with flat impact liners for velocity reduction before discharge.
Primary and secondary apron liners: 18 (9 each apron) replaceable interchangeable stepped designed liners for targeted impact zone crushing.
Tertiary apron liners: replaceable rectangular flat liners designed to reduce the discharge velocity.
Apron adjusters: positive mechanical lock.
Lower housing: fabricated reinforced housing with precision rotor bearing pillow block mounts.
Upper housing: fabricated reinforced housing with access doors
on both sides, precision aligned feed chute with 4" square wear bar at
the rotor.
Side liners: full housing alloy side liners in all crushing areas.
Crusher lid: hydraulic opening and closing, heavy duty mounts for dual aprons.
POWER:
200 hp TEFC electric motor, 5R power band drive belts to the crusher. Fully enclosed drive belt guard with service door.
Enclosed electric panel with start/stop station and emergency shut down. Pedestal mounted with SO cord to all plant motors.
FEED CONVEYOR:
36" channel frame with feed hopper, full length skirt boards, rubber
lagged head pulley, winged tail pulley, screw type take up, TEFC
electric motor with V-belt drive to a shaft mounted gearbox and drive
guard.
UNDER CRUSHER RETURN CONVEYOR:
42"
channel frame return conveyor with impact tray in the crusher discharge
area, angled discharge chute to return to the feed conveyor, full
length skirt boards, rubber lagged head pulley, winged tail pulley,
screw type take up, TEFC electric motor with V-belt drive to a shaft
mounted gearbox and drive guard.
CHASSIS:
Triple axle carrier, Budd wheels, 11:00 x 22.5 wheels and tires. Airbrakes, lights, mud flaps.
Heavy duty impactor mount with rock box style discharge hopper, bolt in T1 wear edges.
Impact crusher feed hood AR lined and chain curtain.
Safety guards provided.
|
